The side mounting holes relative to the interface connector will be the same as the original HDD, thereby ensuring that the new BarraCuda SSD will fit.While there are many reasons to be in love with your Mac computer, one of our favorite reasons by far is the life expectancy. The original bracket for the OEM hard drive that you are replacing will almost always be able to fit the new BarraCuda SSD. These sizes represent the height - or thickness - from top to bottom of the drive. The BarraCuda SSD comes in 7 mm z-height (Figure 2). Most existing laptops contain a standard 5,400 or 7,200 RPM drive 9.5 mm in height (Figure 1). When you have completed these steps, you will be up and running with outstanding system performance.įAQ: How can I tell if a 7 mm BarraCuda SSD will fit in my laptop? Replace the battery and plug the laptop back into the power source. Insert the new drive (with your data on it) into the laptop then replace and tighten the screws.ĥ. Remove the cradle (mounting clamp) from the drive and attach it to the new drive.Ĥ.
Consult the laptop product manual for any further instructions, if necessary.ģ. Unplug your laptop and remove the battery.Ģ. Installing the BarraCuda SSD on your laptop:ġ. Launch the data transfer software then wait until the software lets you know that the transfer is complete. When the USB external drive is recognised, you are ready to launch the data transfer software.Ĥ. It will take a few moments for the external USB drive enclosure to be recognised by your laptop. Connect the USB cable to the USB drive enclosure (with the new drive installed) and to the laptop. Follow the simple instructions and screen prompts.ģ. Use the data transfer software you installed on your laptop to prepare your data. Slide the tray and your new drive back into the enclosure. Open the USB drive enclosure and place the new SSD inside (on the tray), making sure that the top of the drive is facing up. Cloning the contents from your HDD to your BarraCuda SSD:ġ.
Please note that since there are differences between laptop systems, there may be some variation in these instructions. If you already have an external USB drive enclosure and cables, you can download the free DiscWizard software application.įollow these instructions when duplicating the data on your old drive, moving the data to your new BarraCuda SSD and installing your new SSD drive on your laptop. Alternatively, you can buy a data transfer kit that includes all of these items (e.g., CMS products).
It will provide you with specific instructions on how to remove your laptop hard drive. Go to the laptop manufacturer’s website and download it.
Also, check your BIOS settings and update them as needed for SSD compatibility.
Any unauthorised work on your system may void the system manufacturer warranty. Be sure that you are aware and understand any information regarding your warranty.Faster boot-up and application load times.
You’ll be up and running in no time - and feel like you’ve purchased a brand new system! Reasons to upgrade to an SSD: Simply replace your existing 2.5-inch hard drive with a Seagate ® BarraCuda SSD (solid state drive).ĭon’t be afraid to tackle this simple but effective way to boost performance and add needed capacity to your aging laptop. Do you have an older model laptop computer that doesn’t deliver the performance you need? If so, you can breathe new life into your existing computer and increase your system performance without having to purchase a new laptop.